Panasonic Aquarea WH-ADC0309J3E5C - System check; Energy monitor; Error history

205
Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Appendix
8
22
Menus
For user
Menu Default Setting Setting Options / Display
2 System check
2.1
Energy monitor
Present or historical chart of
energy consumption, generation
or COP�
Present
Select and retrieve
Historical chart
Select and retrieve
•COP= Coefcient of Performance.
•For historical chart, the period is selected from 1 day/1 week/1year�
•Energy consumption (kWh) of heating, *
1,
*
2
cooling, tank and total may be
retrieved�
•The total power consumption is an estimated value based on AC 230 V and
may differ from value measured by precise equipment�
2.2
System information
Shows all system information in
each area�
Actual system information of 10 items:
Inlet / Outlet / Zone 1 / Zone 2 / Tank /
Buffer tank / Solar / Pool / COMP
frequency / Pump owrate
Select and retrieve
2.3
Error history
•Refer to Troubleshooting for
error codes�
•The most recent error code is
displayed at the top�
Select and retrieve
2.4
Compressor
Shows the compressor
performance�
Select and retrieve
2.5
Heater
Total hours of ON time for
Room heater/Tank heater�
Select and retrieve
3 Personal setup
3.1
Touch sound
Turns the operation sound ON/
OFF�
ON
3.2
LCD contrast
Sets the screen contrast�
3
*
1
The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�
*
2
Only displayed when COOL mode is unlocked (This means when COOL mode is available)�