Panasonic Aquarea WH-ADC0309J3E5C - Other functions; Weekly timer; Backup heater for space heating; Backup heater for hot water production

62 Aquarea air-to-water heat pumps - Planning and installation manual - 02/2022
Product Description
4
10 Operation indicator
  Lightsupduringoperationandashesifthereisafault.
11 Navigation keys (arrow keys)
Up Down Left Right
Selecting a menu element or entering a value
12 Conrmation Key
  Conrmingtheselectedsettingortheselectedvalue
13 Quick menu button
Invoking the Quick Menu with the following options:
Force DHW
Powerful operation mode
Quiet mode
Force heater
Weekly timer
Force defrost
Error reset
Remote controller lock
14 Back button
Return to the previous display or to the previous element
Other functions
Weekly timer
Setting a weekly timer with up to six switching programmes per day (deactivated if the cooling/heating switch is
activated or the Force heater mode is on).
Holiday timer
Setting a holiday period timer to either switch off the system or to reduce the temperature during this period and
thus save energy. The weekly timer can be deactivated during this time, so that it will be restored automatically
upon completion of the holiday timer period.
Quiet timer
Setting up to six programmes for the quiet mode to reduce the sound level for the set duration.
Backup heater for space heating
Enabling of the backup heater for the heating mode
Backup heater for hot water production
Enabling of the backup heater for the domestic hot water mode
Sterilisation
Activation or deactivation of automatic sterilisation. Observe the locally valid laws and provisions when setting the
sterilisation function. If necessary, please contact your authorised installer or service partner.
Domestic hot water mode (DHW)
  Selectionofthedesireddomestichotwatermode(Standard/Smart).Instandardmode,thelltimeforthehot
water tank is shorter, but the energy consumption is lower in Smart mode. Only available if the domestic hot water
tank is activated.
Another option is the selection of the tank sensor to be used (Top / Center). With the top sensor selected, the
process for heating up the tank is retarded so that energy consumption is reduced. Setting should be changed to
Centerwhenthehotwaterbecomesinsufcient.NotavailableforHgenerationmodels.
Domestic hot water capacity
Selection of the desired heating capacity (Variable / Standard) for the domestic hot water tank heat-up. In Vari-
ablemode,thetankwaterisheatedupfast,thenthetanktemperatureiskeptstablewithmoreefcientpart-load
operation. In Standard mode, the tank water is heated up uniformly with rated heating capacity. Not available for
H generation models.
Selection of the Temperature Sensor
Selecting between water temperature sensor, room temperature sensor and room thermostat. In the case of room
thermostat, there is another option, to select between external and internal temperature sensor.
Backup heater capacity
Selection of the maximum power setting desired for the electrical heating element for the heating mode; 3 kW /
6 kW / 9 kW (depending on the model concerned)