Aquarea air/water heat pump – Installation manual for compact systems 03 / 20135 – 16
Opening the device
Remove the front panel
³ Remove the 5 fastening screws
³ Push the front panel of the cabinet downwards to release
the safety catches.
³ Pull the front panel forwards to remove it.
Removing the upper cabinet panel
³ Remove the 11 fastening screws.
³ Lift the upper cabinet panel from the device.
Reverse the steps accordingly to close the device.
5 Opening the device
Danger! 7KHZRUNPD\RQO\EHSHUIRUPHGE\TXDOLÀHGRUFHUWLÀHGSHUVRQQHO
Ensure that the device is disconnected from the power supply before
you perform the steps listed below.
1
1
1
1
Fastening screws
1
Fastening screws
To Next Page
Loading...
