EasyManua.ls Logo

Panasonic AVCCAM AG-AC160P - Checking Recorded Images (REC CHECK); Memory Card Access Lamp; Selecting a Slot

Panasonic AVCCAM AG-AC160P
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
Checking recorded images (REC CHECK)
While shooting is paused, press the <REC
CHECK> button to review the video and audio
recorded three seconds immediately prior. After
reviewing, the camera returns to the recording
pause status.
The REC CHECK images are also recorded
when a device is connected to the camera and
backup images have been recorded.
When the operation mode is <PB> mode, REC
CHECK does not work.
This function does not work if the [REC
FORMAT] is changed, if the camera is set to the
<CAMERA> mode after having been switched to
the <PB> mode, if the memory card slot cover is
opened, or if the slot is switched after shooting.
This function does not work with SIMUL REC.
Memory card access lamp
Illuminated orange:
Reading, writing possible
Flashing orange (slow):
Accessing memory card
Flashing green:
Memory card write-protected, the slot with
[CHECK CARD.] indication, no space left on
memory card
Illuminated green:
Other than the selected slot
Off:
No memory card inserted, unformatted memory
card, or incompatible memory card inserted
When the USB is connected
Flashing orange:
Accessing memory card
Off:
A status other than access underway
Memory card access lamp
Selecting a slot
The slot to be used for recording can be switched
between the two memory card slots.
1
Press the <SLOT SEL> button while the
camera is standby for recording.
The access lamp of the slot for recording lights
up orange.
This function works when a recordable
memory card is inserted in both slots.
The slot cannot be switched during recording.

Table of Contents

Related product manuals