25
Preparation
Attaching the handle
The handle comes in handy for taking low-angle
shots or carrying the camera-recorder around.
1
Pull the viewfinder towards you.
2
Slide the handle into place.
3
Tighten the coin screw to secure the handle
firmly.
If the coin screw is loose, the camera-
recorder may drop off.
To remove the handle, first pull the viewfinder
towards you, and then loosen the coin screw.
•
•
Coin screw
Fitting the eye cup
Attach the eye cup by aligning the projections on
the eye cup holder and eye cup and fitting them
together.
Eye cup holder
Eye cup
Fit the eye cup onto the viewfinder, and secure it in
the direction of the arrow.
To Next Page
Loading...
