14
How to Use the On Screen Menu (continued)
• Use the menu to display the time code for HD-SDI
signal input. It also allows you to switch display mode
(VITC, LTC, VUB, LUB).
In VITC and LTC display mode:
• Displays the time code in hours: minutes: seconds:
or frames.
• In drop-frame mode, a different delimiter between
seconds and frames is used.
Note:
Read errors are displayed as “--:--:--:--”
In VUB and LUB display modes:
• BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear
in the stated order. BG: binary group
• The (:) delimiter does not appear.
Note:
Read errors are displayed as “--:--:--:--”
• Use the menu to display closed caption for VIDEO
(NTSC) signals. It also allows you to select display
mode (CC1 to CC4).
Note:
Closed captions are not available during HV DELAY.
Time code (TC) display
( : ) NDF
( . ) DF
Closed caption (CC) display
To Next Page
Loading...
