12 Click [Next].
<Only for model with onboard drive>
If the installation drive is displayed, conrm it.
If the option is displayed, select the setting and click [Next].
l
[Initialize and reinstall Windows to the whole Disk]
Select this option when you want to install Windows to the factory default. After instal-
lation, you can create a new partition. For how to create a new partition, refer to “To
change the partition structure” (
è
page 12).
l
[Reinstall Windows to the OS related partitions]
*2
Select this option when the hard disk has already been divided into several partitions
and you want to keep the partition structure. For how to create a new partition, refer to “To
change the partition structure” (
è
page 12).
*2
This does not appear if Windows cannot be installed to the recovery partition and the area us-
able by Windows.
13 <Only for model with onboard drive>
Select the setting and click [Next].
14 At the conrmation message, click [YES].
Installation starts according to the instructions on the screen. (It will take approximately
30 - 45 minutes.)
l
Do not interrupt installation, for example by turning off the computer or pressing
Ctrl
+
Alt
+
Del
.
Otherwise installation may become unavailable as Windows may not start up or the
data may be corrupted.
15 When Ending process screen is displayed, remove the Recovery Disc
and CD/DVD Drive or commercially available optical drive and then
click [OK].
Follow the on-screen instructions.
Some models may take approximately 40 minutes.
16 Perform the “First-time Operation” (
è
page 10).
17 Start the Setup Utility and change the settings as necessary.
18 Perform Windows Update.
19
<Only for model with TPM> Clear TPM (
è
page 19).
To Next Page
Loading...
