2
S.No. Do’s Don’t
7 Create environment aware-
ness PAN India Level.
Do not dispose your product
in garbage bins along with
municipal waste that ultimate-
ly reaches landfill.
68-M-3
Precautions
If a Malfunction or Trouble Occurs, Immediately Stop Use
If a Malfunction Occurs, Immediately Unplug the AC Plug
• This product is damaged
• Foreign object inside this product
• Smoke emitted
• Unusual smell emitted
• Unusually hot
Continuing to use this product while any of the above conditions are
present may result in fire or electric shock.
• If a malfunction occurs, immediately unplug the AC plug. Then, con-
tact your technical support office for repair.
Do Not Touch This Product In a Thunderstorm If Connected with
the AC Cable or Any Other Cables
Electric shock may result.
Do Not Connect the AC Adaptor to a Power Source Other than a
Standard Household AC Outlet
Otherwise, a fire due to overheating may result. Connecting to DC/AC con-
verter (inverter) may damage the AC adaptor. On an airplane, only connect
the AC adaptor/charger to an AC outlet specifically approved for such use.
Do Not Do Anything That May Damage the AC Cord, the AC Plug,
or the AC Adaptor
Do not damage or modify the cord, place it near hot tools, bend, twist, or pull
it forcefully, place heavy objects on it, or bundle it tightly.
Continuing to use a damaged cord may result in fire, short circuit, or
electric shock.
Do Not Pull or Insert the AC Plug If Your Hands Are Wet
Electric shock may result.
Clean Dust and Other Debris of the AC Plug Regularly
If dust or other debris accumulates on the plug, humidity, etc. may
cause a defect in the insulation, which may result in a fire.
• Pull the plug, and wipe it with a dry cloth.
Pull the plug if the computer is not being used for a long period of time.
Insert the AC Plug Completely
If the plug is not inserted completely, fire due to overheating or electric
shock may result.
• Do not use a damaged plug or loose AC outlet.
Do Not Touch the Surface Continuously While Using/Charging.
Burns may result.
Hold the Plug When Unplugging the AC Plug
Pulling on the cord may damage the cord, resulting in a fire or electric shock.
Do Not Move This Product While the AC Plug Is Connected
The AC cord may be damaged, resulting in fire or electric shock.
• If the AC cord is damaged, unplug the AC plug immediately.
Do Not Subject the AC Adaptor To Any Strong Impact
Using the AC adaptor after a strong impact such as being dropped may
result in electric shock, short circuit, or fire.
Be Absolutely Sure to Use the AC Adaptor With the Specified Product.
*1
Use with any other product may result in a fire.
*1
For information about the products for which the AC adaptor can be used,
refer to the Operating Instructions of your product or various sources.
Supplied accessories
AC Adaptor 1
AC Cord
*2
1
OPERATING INSTRUCTIONS (This book) 1
Warranty 1
*2
The AC cord selected at the time of purchase is attached.
The number of cords supplied varies depending on the country
or region of the product model.
Specifications
Voltage Input 100 V - 240 V AC
*3
Output 15.6 V DC, 7.05 A
Dimensions
(W x D x H)
Approx. 143 mm x 31 mm x 54 mm
{5.7" x 1.3" x 2.2"}
Weight
(Except AC Cord)
Approx. 360 g
{Approx. 0.79 lb.}
*3
Use only the supplied AC cord for this AC adaptor.
The AC cord for North America is compatible up to 125V.
• <When using with 115 V AC / 240 V AC>
Even when the AC adaptor is not connected to the computer,
power is consumed (Max. 0.3 W) simply by having the AC adap-
tor plugged into an AC outlet.
简体中文
有毒有害物质或元素名称及含量
部件名称 有毒有害物质或元素
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬 (CrVI) 多溴联苯 (PBB) 多溴二苯醚
(PBDE)
机壳 ○ ○ ○ ○ ○ ○
安装主板 × ○ ○ ○ ○ ○
电线组件 × ○ ○ ○ ○ ○
○ ：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363–2006标准规定的限量要求以下。
× ：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363–2006标准规定的限量要求。
※部分配件根据产品型号的不同可能没有配置。
注意
发生故障或问题时，应立即停止使用。
发生故障时，应立即拔下交流插头
•
本品受损
•
本品内有异物
•
放出烟雾
•
放出异味
•
过热
发生上述情况之一时，如继续使⽤本品，则可能引起火灾或触电。
•
发生故障或问题时，应立即拔下交流插头。然后与技术支持部
门联系维修。
打雷时，切勿触摸本品及电缆
可能引起触电。
请勿将交流电源适配器连接到标准家用交流电源插座以外的其他电源
否则可能由于过热而引起火灾。连接到 DC/AC 变流器（变换器）
可能会损坏交流电源适配器。在飞机上，只能将交流电源适配器 /
充电器连接到经特别许可⽤于该⽤途的交流电源插座。
切勿损坏交流电源线、交流插头或交流电源适配器
切勿损坏或改动电源线，将其放置在较热的工具附近，弯折，扭
绞或⽤力拉扯，在其上放置重物，或将其捆紧。
如继续使⽤受损的电源线，可引起火灾、短路或触电。
在手潮湿的情况下，不得插、拔交流插头
可能引起触电。
定期清理交流插头上的灰尘和其他污垢
如灰尘或其他污垢在插头上堆积，潮气等可能使绝缘层受损，从
而引起火灾。
•
取下插头，⽤干布擦拭。
如长时间不使⽤计算机，应将插头拔下。
完全插入交流插头
如插头未完全插入，可能由于过热而引起火灾或发生触电。
•
不得使⽤受损的插头或松动的交流电源插座。
请勿在使用 / 充电时持续接触交流电源适配器的表面
•
否则可能导致灼伤。
拔出交流插头电时应握住插头
如拉扯电源线，则可能使其受损，从而引起火灾或触电。
To Next Page
Loading...
