Panasonic CF-VDM312U

18
E
Using the Software
You can run “PowerDVD” using either of the following procedures.
Double-click on the desktop.
Click (Start) - [All Programs] - [CyberLink PowerDVD 10 for Panasonic] -
[CyberLink PowerDVD 10 for Panasonic].
Running PowerDVD
To access the Online Manual
Right-click on the [CyberLink PowerDVD] screen and click [Settings...] - [Help].
Click “ ” of the [CyberLink PowerDVD] screen.
NOTE
DVD-Audio cannot be played back using “PowerDVD”.
Do not start “PowerDVD” while the drive indicator is blinking immediately after
the computer is turned on.
While “PowerDVD” is running, do not:
• Enter sleep or hibernate.
• Switch the display by pressing
+
P
or
Fn
+
F3
.
During video playback, do not:
• Eject the disc.
• Use other applications or the Command Prompt.
• Change the settings of the screen properties.
If you maximize the video display window, you can return to the original window
size by double-clicking over the images.
When the number of display colors is increased, a message appears and the DVD
cannot be played:
• Reduce the number of display colors.
Immediately after resuming from a pause, frame dropping may occur depending on
the operating environment or DVD-Video (images or sounds are disrupted).
NOTE
When a disc has so many folders, “PowerDVD” may not operate correctly. Remove
the disc as follows.
• Click
(Start) - [Computer], right-click [DVD RW Drive (x:)] and select [Eject]
from the menu.
DFQW5658ZA_CF-VDM312U_OI_EGFJ.indb 18 2012/05/23 13:21:53