112
SD Memory Card Security Function
C Enter the Supervisor Password.
z If the Supervisor Password has been set
Enter the Supervisor Password, then click [OK]
z If the Supervisor Password has not been set
Follow the onscreen instructions to set the Supervisor Password.
Enter the Supervisor Password, then press the
Tab
key.
Reenter the Supervisor Password for confirmation, then click [OK].
Click [Yes] on the confirmation screen.
Supervisor Password and [Password on boot] in the [Security] menu of the
Setup Utility will be set to be enabled (Î page 154)
z To use when logging on to Windows
The Windows log-on user name and password set in [Control Panel] are registered
in the SD memory card.
After making this setting, the following functions will be disabled.
z Displaying the Welcome screen
z The Fast User Switching function
z Remote desktop connection
A Add the check mark for [Use when logging on to Windows] (C) and click
[Next].
To Next Page
Loading...
