Panasonic CF-Y2 Series

14
Using the Touch Pad
Using the Virtual Scrolling Function
Set the Virtual Scrolling function using the following procedure. The Touch Pad utility will be
disabled.
1 Click on the icon on the notification area, and click [Settings].
If the icon is not displayed on the notification area:
A Click [start] - [All Programs] - [Panasonic] - [Touch Pad utility settings].
2 Remove a check mark from [Use Touch Pad function] in [General set-
tings], and then click [OK].
The icon on the notification area will change to the icon.
3 Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Mouse] - [Device Settings].
4 Click the device name in [Devices] (e.g., Synaptics TouchPad), then
click [Settings].
5 Click [Virtual Scrolling], add a check mark for the scroll functions you
want to use, then click [OK].