148
Setup Utility
z When [Password on boot] in the Setup Utility is set to [Disable]:
• When the computer is started up, entering a password is not necessary
• When the Setup Utility is started up:
The password becomes necessary. This alternative can prevent the contents of the
Setup Utility from being changed
z If you fail to press the
F2
key at the right moment, the Setup Utility will not start up. In
this case, let the computer fully boot up, and then perform a shutdown or restart from
Windows.
z To close the Setup Utility:
A Press the
Esc
key.
B Select the exiting method from the [Exit] menu and press the
Enter
key.
C Select [Yes] and then press the
Enter
key.
To Next Page
Loading...
