Panasonic CF-Y2 Series

45
Standby/Hibernation Functions
• Connecting or disconnecting the AC adaptor
• Closing or opening the display
<CF-Y2 series>
• Sliding the drive power/open switch
<CF-W2 series>
• Sliding the open lever
z It may take one or two minutes to enter standby or hibernation mode
In standby or hibernation mode
z Do not insert or remove peripherals; abnormal operation may result
z In standby mode, power is consumed. If PC Cards are inserted, more power is consumed.
When all power has been consumed, all data saved at standby is lost since it is retained in
memory. We therefore recommend plugging in the AC adaptor when using the standby
function
Using the Power Switch
Setting
1 Click [start] - [Control Panel] - [Performance and Maintenance] -
[Power Options] - [Advanced].
2 Click [Stand by] or [Hibernate] for [When I press the power button on
my computer], and then click [OK].
Entering the standby or hibernation mode
1 Slide the power switch (A); release your finger at the beep
*1
sound.
The computer will enter either the standby or hibernation mode, depending on the
setting.