Panasonic CF-Y2 Series - Page 47

47
Standby/Hibernation Functions
The computer will enter either the standby or hibernation mode, depending on the
setting.
z When entering the standby or hibernation mode, close the display correctly. If
you do not, (for example, if you open the display soon after you close it) the
computer may not enter standby or hibernation mode
CAUTION
z Until resuming is complete (requires about 15 seconds, or 60 seconds if connected to
a network, after the display returns), avoid the following:
• Touching the keyboard (except for password input), touch pad, or power switch
• Using external mouse or other peripheral devices
• Connecting or disconnecting the AC adaptor
• Closing or opening the display
• Shutting down or restarting Windows
• Entering either the standby or hibernation mode again
<CF-Y2 series>
• Sliding the drive power/open switch
<CF-W2 series>
• Sliding the open lever
Resuming Operation (Recovery from standby or hibernation mode)