66
DVD MULTI Drive
2 Select the desired time in [Auto Off Setting].
z There is a check mark in the current settings.
z Select [Disable] to deactivate the [Auto Off Setting].
Switch the drive power on/off using [Manual Switching].
z Using this utility, you can turn the drive power on or off. In this case, select [On] or [Off] for
[Manual Switching].
[Manual Switching] operates regardless of whether or not a disk is set in the drive.
NOTE
z Select [Exit] to close the Optical Disc Drive Power-Saving utility.
To restart this utility, click [start] - [All programs] - [Panasonic] - [Optical Disc Drive
Power-Saving Utility], or restart the computer.
z In the following cases, the drive power will not turn off even after the time set in [Auto
Off Setting].
• When the disk cover is open.
• When a disk is set in the drive.
• When an external CD/DVD drive is connected.
• When WinDVD is running
z When the cursor is placed over the icon or the icon, pop-up text will indicate
the drive status and the setting time.
z When the drive power is off, the icon is displayed on the notification area (only
when B’s CLiP is installed).
To Next Page
Loading...
