15
Clock Basics
(The clock system is 12-hours.)
Initial Time
Press and hold [CLK] to set time display. "AM 12:00" blinks, and
the time setting mode is activated.
Press
[
ii
] to set the hour.
Press
[
jj
] to set the minute.
(Hold
[
ii
] or [
jj
] to change numbers rapidly.)
Once the time has been set, release [CLK].
Note: When the clock is not set yet, "SET" is displayed.
Resetting the Time
When you want to reset the time, repeat step
and
above.
Selecting the Clock Display
Press [CLK] to display the current time.
Press
[CLK] again to returns display.
Note: The current time will be displayed at all the time even the
power of the radio is turned off.
To Next Page
Loading...
