Preparation
The 12-hour system is used for the clock.
1
Turn the ignition switch until
the accessory indicator
lights.
2
Press [SRC] (PWR: Power).
3
Press [DISP] (CLOCK).
4
Hold down [DISP] (CLOCK) for more than
2 seconds.
5
Adjust the hour.
[[]: sets the hour ahead.
[]]: sets the hour back.
6
Press [DISP] (CLOCK).
7
Adjust the minute.
[[]: sets the minute ahead.
[]]: sets the minute back.
8
Press [DISP] (CLOCK).
Notes:
¡ “AdJ” is displayed before adjusting the clock.
¡ Hold down []] or [[] to change numbers rapidly.
Clock Display at Power Off
Press [DISP] (Display) to change the display.
Clock Setting
Display off
Clock display
ACC
ON
CQ_C1103UOIeng_M-90% 10/21/2005 3:39 PM 頁面 5
To Next Page
Loading...
