CQ-DP383U CQ-DP383U
E
N
G
L
I
S
H
6
21
E
N
G
L
I
S
H
5
20
Band
Press [BAND].
2
Radio Mode
Press [SRC] (source) to change to the radio
mode.
1
Tuning
[$]: Up
[%]: Down
Press and hold [%] or [$] for more than
0.5 seconds, then release.
Seeking will start.
3
Radio mode display
Note:
≥ Existing saved stations are overwritten with new
stations after this procedure above.
1 Select a band. (previous page)
2 Press [1] to [6].
Caution:
≥ To ensure safety, never attempt to preset stations while you are driving.
Press [DISP] (display).
Radio mode display
(default)
Clock display
Band Frequency
FM stereo indicator
Manually save a station in the preset memory.
1 Select a band and frequency. (previous page)
2 Press and hold [1] to [6] for more than
2 seconds to memorize.
≥ The display blinks once, and a receiving sta-
tion is saved in the memory.
Automatically save stations with good reception in
the preset memory.
1 Select a band. (previous page)
2 Press and hold [APM] for more than 2 sec-
onds.
≥ The 6 stations with good reception will be auto-
matically saved in the memory under preset num-
ber 1 to 6.
≥ Once set, the preset stations are sequentially
scanned for 5 seconds each. (scanning)
≥ To stop the scanning, press [1] to [6].
Preset Station Setting
Preset Station Calling
Manual Preset Memory
Auto Preset Memory (APM)
Radio
[1] to [6] (preset station)
Preset number
Display Change
≥ Up to 6 stations each can be saved in the FM1,
FM2, FM3 and AM preset station memories.
To Previous Page
Loading...
