④SEEK∧ button：
⑦REP button：
ERROR 1
ERROR 2
ERROR 3
Press again to cancel RANDOM PLAY function. The RX indicator is off.
Then the first 10 seconds of available tracks of all discs in CD changer is played in sequence.
⑥RX button：
Press [RX] to display " RX " on screen.
Then all available tracks of all discs in CD changer are played in random sequence.
Press again to cancel REPEAT PLAY function. REP indicator is off.
Function and Operation on CD CHANGER
⑤SCAN button：
Press [SCAN] to display " SCAN " on screen.
Press [ SEEK∧ ] and hold for more than 2 seconds to activate FAST FORWARD through a track.
Release it to resume the normal CD play from that position.
Press [REP] to display " REP " on screen.
The functions of VCD changer are the same as above-mentioned.
Screen display " NO DISC ". When there is no disc in disc magazine.
Press EJECT ▲ button on cd changer to eject disc magazine. Screen display " EJECT "。
After disc magazine ejected, there is no magazine in CD changer. Screen display " NO MAG "。
The current track is re
eated.
●Display of error messages
Disc has scratches, select the next disc.
Disc is not operated by some causes. Press ▲ to eject magazineand. After checking, insert the magazine again.
Disc is dirty or upside down, select the next disc.
Press again to cancel SCAN function. The SCAN indicator is off.
Press [ SEEK∧ ] and release in 2 seconds to play from the beginning of next track.
※NOTE：
For your safety, do not watch VCD while you are driving.
page16
To Next Page
Loading...
