Stopping and Ejecting the
Tape
Once inserted into the unit, your tape will play continuously until
you eject it.
If you press [
u
] (EJECT), the unit ejects the tape and returns to
radio operation.
When you stop the car engine, the tape will stop but not be
ejected.
Notes:
●
You can not change to CD Changer mode or Radio mode while
tape playing. If you want to change to CD Changer mode or
Radio mode, eject the tape.
●
Always remove the cassette when you stop using the cassette
player. This will prolong the life of your tape.
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack
as shown. If a loose tape is used, this may result
in the tape becoming tangled in the rotating
parts of the unit.
Notes:
●
To maintain your cassette player in top condition, avoid using tapes that are longer than 90
minutes (C-90).
●
If you insert into the unit a cassette with a loose tape caused by forcing it into cassette with a
finger or the like, the cassette may not be properly reproduced. In such a case, eject the
cassette, make the tape tigt, then insert it back into the deck.