Initial Time Setting
Press [DISP]. “AdJ” is displayed.
Press and hold [DISP] again for more
than 2 seconds. “12” blinks indicating
the time setting mode is activated.
To set hours, press [
jj
] or [
ii
].
Press [DISP] again for minute setting.
To set minutes, press [
jj
] or [
ii
].
Hold [
jj
] or [
ii
]to change numbers
rapidly.
When you have set the time, press
[DISP].
d
d
Resetting the Time
When you want to reset the time, press and hold [DISP] for more
than 2 seconds to activate the time setting mode. Then, repeat
step
to
above.
Selecting the Clock Display
Press [DISP] for clock display.
Press [DISP] once again, the current audio display mode
resumes.
To Next Page
Loading...
