6
7
CQ-VW100W
English
❏ Mounting Procedures (B)
(When not using Mounting Collar w)
Use the brackets supplied with your car when mounting
this unit. The bracket shape and mounting method vary
with car manufacturers, car types and manufacturing
year. Please consult your nearest dealer or installer.
❏ Removing Procedures
q Remove the trim plate q.
w Lock release.
q Insert the lock cancel plate e until you hear a
click.
w Pull the unit out.
e Pull the unit out with both hands.
Note:
¡Use pliers to bend the fingers
on the bracket vertically.
Select mounting screws according to the hole
positions and hole shape of the bracket.
t Round Head Screw
(5 mmø x 8 mm)
Note:
¡Reuse the two round head screws removed
from the transportation brackets. (
a page 5)
y Flat-Head Screw
(5 mmø x 8 mm)
To Next Page
Loading...
