Electrical Connections
Caution
¡This unit is designed for use in a car having a 12 V negative ground battery system.
¡Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡Run the cords avoiding the spots where the temperature can be extremely high.
Video Output Terminal (VIDEO OUT)
Connect the rear monitor. (a page 15)
Pre-Out Connector (front)
To an external amplifier.
Pre-Out Connector (rear)
To an external amplifier.
Video Input Terminal (EXT VIDEO IN)
Connect the video output terminal of Expansion Module (CY-
EM100N, option).
Audio/Video Input Terminal (AV1 IN)
Audio/Video Input Terminal (AV2 IN)
Connect a VCR, camcorder, other brand’s car
navigation system, etc. (
a page 15)
Camera Input Terminal (CAMERA IN)
Connect a rear view camera. (a page 16)
(Yellow)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(Yellow)
(Yellow)
Fuse (15 A) Refer fuse replacement to your nearest
authorized Panasonic Service Centre. Do not try fuse
replacement by yourself.
CQ-VW100W (Rear)
(R)(Red)
(L)(White) (Yellow)
To Next Page
Loading...
