Panasonic CQ-VW120W - Remote Control Functions

10
11
CQ-VW120W
English
CAMERA IN
P
N
D
2
L
R
P a
n
a
s
o
n
i
c
Connecting the Reverse Lead
If using an optional rear view camera, the reverse lead must
be connected.
Connect the reverse lead (violet/white stripe) to the positive (+)
lead of the reverse lamp (the lamp with a clear lens that lights
when the transmission gear is shifted into the reverse position).
Note:
¡Connect the reverse lead after cutting the terminal at the end.
¡Use a Reverse Extension Cord (option) if needed.
Connection with Rear View Camera
Rear View Camera
(CY-RC50KW) (option)
(Video)
(Yellow)
RCA Cord (option)
Rear View Camera
Control Unit (option)
CQ-VW120W (Rear)
u Power Connector
Reverse lamp
Clip connector
(From car accessories stores)
Battery
Car chassis
Transmission gear
Reverse Lead
(Violet/white stripe)
Camera Input
Camera Input Terminal (CAMERA IN) (Yellow)
Check the reverse lamp.
Take it out of the back
of the tail lamp mount.
Note:
¡Refer to the operating instructions for the connected devices, in addition.