7
8
CQ-VW120W
English
Electrical Connections
Caution
¡This unit is designed for use in a car having a 12 V negative ground battery system.
¡Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡Run the cords avoiding the spots where the temperature can be extremely high.
Radio Antenna Connector
(RADIO ANT IN)
Pre-Out Connector (front)
To an external amplifier.
Pre-Out Connector (rear)
To an external amplifier.
Camera Input Terminal (CAMERA IN)
Connect a rear view camera. (
a page 11)
(Orange)
(Yellow)
Navi Mute Lead
Connect to the Navi Mute Lead of the Panasonic car
navigation system. (available in future)
Fuse (15 A) Refer fuse replacement to your nearest
authorized Panasonic Service Centre. Do not try fuse
replacement by yourself.
CQ-VW120W (Rear)
(R)(Red)
(L)(White)
RGB Connector
To the Panasonic Car Navigation
System (available in future).
To Next Page
Loading...
