Panasonic CQ-VW220W - Touch Panel Operation Overview

6
7
English
CQ-VW220W
Touch Panel Operation Overview
The State of Operation Screen
❒ Notes on the Touch Panel
Before operation
¡Clean the surface of the touch panel. (a Operating
Instructions)
Operation
¡Use only your fingers to operate the touch panel.
¡Do not press the panel forcefully.
¡Do not scratch the panel with fingernails or any
hard objects.
¡Do not use a pen or other sharp implements to
operate the touch panel.
¡Do not bump the front panel.
a Failure to observe the above may damage or
break the glass on the surface of the touch
panel.
Example: DVD mode
Note
:
¡The following picture is partly darkened for explanation.
¡Displaying contents and their positions partly vary with each mode. Refer to the description of each mode for details.
Prohibition
Input is not possible
because the user has
attempted to perform
an operation which is
not supported by the
disc contents.
Displays the Source Selection Screen.
Source Button Setup Button
Displays the Setup Screen.
Disc indicator (a Operating Instructions)
(Lights when a disc is loaded)
Clock time
(a Operating
Instructions)
(Content varies with each source)
Source Selection Screen appears.
Touch desired source button.
Touch to quit.
Source Selection Screen Setup Screen
Setup Screen appears. Select desired setting.
Setup menu, (a Operating Instructions)
Sound Button
(a Operating
Instructions)
Aspect Button
(a Operating
Instructions)
(only for video source)
Press [SRC/PWR]/[SRC] to change to
desired mode.