Panasonic CQ-VW220W - Electrical Connections

7
8
CQ-VW220W
English
VIDEO OUT
EXT VIDEO IN
CAMERA IN
PRE OUT REAR
PRE OUT FRONT
Electrical Connections
Caution
¡This unit is designed for use in a car having a 12 V negative ground battery system.
¡Be sure to insulate any exposed wires from the car chassis. Bundle all cables and keep cable terminals free from
any metal parts.
¡Note that if your car has a driving computer or a navigation computer, disconnecting the cable from the battery
may clear the memory.
¡Run the cords avoiding the spots where the temperature can be extremely high.
Video Output Terminal (VIDEO OUT)
Connect the rear monitor. (
a page 12)
Pre-Out Connector (front)
To an external amplifier.
USB Connector
To a USB audio device or an iPod/iPhone.
Pre-Out Connector (rear)
To an external amplifier.
Audio/Video Input Terminal (AV1 IN)
Audio/Video Input Terminal (AV2 IN)
Connect a VCR, camcorder, other brand’s car
navigation system, etc. (a page 12)
Camera Input Terminal (CAMERA IN)
Connect a rear view camera. (
a page 13)
(Yellow)
Video Input Terminal (EXT VIDEO IN)
Connect the video output terminal of TV tuner
(CY-TUP133W/CY-TUN133W, option)
(Yellow)
(R)(Red)
(L)(White)
(R)(Red)
(L)(White)
(Yellow)
CQ-VW220W (Rear)
(R)(Red)
(L)(White) (Yellow)
Fuse (15 A) Refer fuse replacement to your nearest
authorized Panasonic Service Centre. Do not try fuse
replacement by yourself.
VW220WII01eng.qxd09.2.247:30PMページ8