To Next PageTo Next PageHow to tell if my Panasonic CS-A12HKD Air Conditioner compressor is not compressing sufficiently?
If the electric current during operation is approximately 20% lower than the normal value, or if the discharge tube of the compressor becomes abnormally hot (normally 70 to 90°C), or if the difference between high and low pressure becomes almost zero, it indicates insufficient compressing of a compressor.
General| Brand | Panasonic |
|---|---|
| Model | CS-A12HKD |
| Category | Air Conditioner |
| Language | English |
Explains symbols for prohibitions and compulsory actions, categorizing risks like death, serious injury, or property damage.
Details safety warnings for remote control, power supply, indoor, and outdoor units to prevent injury or damage.
Specifies indoor/outdoor temperature ranges for cooling and heating, and temperature definitions like DBT/WBT.
Covers battery disposal, end-of-life disposal, and wiring color codes for safe installation and use.
Describes the air purification technology using e-ion filters and generator for improved air quality and fresh air effect.
Explains how to turn the unit on/off, set temperature, and select operation modes like AUTO, HEAT, COOL, DRY via remote.
Details how to select fan speed (3 options) and adjust vertical airflow direction (5 options) using the remote control.
Covers quiet operation, quick temperature achievement, timer settings, and optional settings like indicator brightness and temperature display.
Provides guidance on cleaning filters, front panel, and e-ion generator, with cautions on materials and water temperature.
Outlines seasonal inspection, procedures for extended non-use, and criteria for non-serviceable conditions requiring professional help.
Lists common symptoms that do not indicate malfunction, such as mist, water flow, or cracking sounds, with their causes.
Provides a checklist of common issues (e.g., inefficient operation, remote failure, unit not working) and checks to perform before calling for servicing.
Instructions for inserting AAA or R03 batteries and closing the remote control cover for initial setup.
Guides on selecting desired operation mode, starting/stopping the unit, and setting the desired temperature using the remote.
