To Next PageTo Next PageWhat happens if the Panasonic CS-A12DKD compressor is not compressing sufficiently?
If the Panasonic Air Conditioner's compressor is not compressing efficiently, the electric current during operation will be approximately 20% lower than the normal value. Additionally, the compressor's discharge tube will become abnormally hot, typically between 70 to 90°C. The difference between high and low pressure will also be almost zero.
General| Brand | Panasonic |
|---|---|
| Model | CS-A12DKD |
| Category | Air Conditioner |
| Language | English |
Provides detailed technical specifications for the CS-A7DKD model.
Lists the technical specifications for the CS-A9DKD model.
Details the technical specifications for the CS-A12DKD model.
Presents the detailed wiring schematic for CS-A7DKD/A9DKD units.
Provides the detailed wiring schematic for the CS-A12DKD unit.
Explains the process and parameters of the heating operation mode.
Details the functionality and behavior of the cooling operation.
Describes the dehumidification and gentle cooling mode.
Essential safety guidelines for installation and operation.
Crucial safety measures and warnings for installation.
Covers air purging, pumping down, evacuation, and gas charging.
Diagnosing issues based on refrigerant cycle parameters.
