<Precautions on using capacity and electrical characteristics curves>
- Heating capacity when the unit is frosted over or while being
defrosted will vary depending on outdoor temperature ('CW8) and
the amount c frost. Heating capacity performance must be
compensated because it does not take into account the capacity
drop incurred when the unit is frosted over and while it is being
defrosted. Therefore, to obtain the integral heating capacity in
consideration 01 overfrosting and defrost operations. Heating
capacity must be multiplied by the compensation coefficient
below.
- Heating capacity compensation coefficient for heating in frosted
situations.
16. DISCHARGE AND SUCTION PRESSURE
16.1. SATURATION TEMPERATURE OF DISCHARGE AND SUCTION
PRESSURE
To Next Page
Loading...
