44
• Indicator
- When Patrol operation starts, Patrol LED is ON with 3 different colors:
- Then e-ion operation starts based on dirtiness level, both Patrol LED and e-ion LED are ON.
• Remote Control Receiving Sound
- Normal Operation → Patrol Mode : Beep
- Patrol Mode → Stop : Long Beep
- Patrol Mode → Normal Operation : Beep
-Stop → Patrol : Beep
• Timer Control
- When ON timer activates when unit stops, previous operation resumes without Patrol operation.
- When ON timer activates during any operation, no change and carry on current operation.
- When OFF timer activates during any operation, all operation stops.
• Power Failure Control
- During Patrol individual operation, if power failure occurs, after power resumes, Patrol individual operation resumes
immediately.
- During combination operation, if power failure occurs, after power resumes combination operation resume immediately.
• Error Detection Control
- The Patrol error detection control starts once the power is supplied to Patrol sensor. However, the error will display when the
Patrol operation is ON.
- Error detection method:
• If the Patrol sensor is opened circuit continuously for 6 hours, Patrol sensor error occurs. However, the error will display
only when the Patrol operation is ON.
- Patrol Sensor Control after error occurs
• During any operation mode combines with Patrol operation
- Power supply to Patrol sensor is OFF
- Air conditioner normal mode operation continues with Patrol LED blinking.
- The Patrol LED continues blinking if the patrol operation is ON and stops blinking if the patrol operation is OFF.
• During Patrol individual mode
- Power supply to Patrol sensor is OFF
- Patrol LED blinks.
- The Patrol LED continues blinking if the Patrol operation is ON and stops blinking if the Patrol operation is OFF.
- Error cancel condition:
• Power supply reset
Patrol LED Air Quality
Blue Clean
Orange Moderate
Red Dirty
To Next Page
Loading...
