8.12. Powerful Mode Operation
Purpose of this operation is to be obtain the setting temperature quickly.
1. Cooling and Soft Dry Mode
• When the Powerful Mode is set, the set temperature will be automatically decreased 3°C against the present setting
temperature. This operation automatically will be running under Super High Fan speed.
• Vertical Airflow Direction:-
In “Manual” setting, the vane will automatically shift down 10°C lower than previous setting.
In “Auto” setting, the vane will automatically swing up and down. However the upper and down. However the upper and
lower limit will be shifted 10° downward.
2. Heating Mode
• When the Powerful Mode is set, the set temperature will be automatically increased 3°C against the present setting
temperature.
• The Fan Speed will shift as shown below:
• Vertical Airflow Direction:-
In “Manual” setting, the vane will automatically shift down 5°C lower than previous setting.
In “Auto” setting, the vane will automatically shift between upper and lower limit depending on the intake air temperature as
Heating Mode, Airflow Direction Auto-Control. However the upper and lower limit will be shifted 5°C downward.
3. Powerful mode will operate for 15 minutes only.
4. Powerful Mode will stop if:
• Powerful mode button is pressed again.
• Stopped by ON / OFF switch.
• Timer-off activates.
• Economy mode button is pressed.
• Sleep mode button is pressed.
• Operating mode is changed.
32
CS-A7BKP CU-A7BKP5 / CS-A7BKP CU-A7BKP6 / CS-A9BKP CU-A9BKP5 / CS-A9BKP CU-A9BKP6 / CS-A12BKP CU-A12BKP5 / CS-A12BKP CU-A12BKP6
To Next Page
Loading...
