8
1. Cooling capacities are based on indoor temperature of 27°C D.B. (80.6°F D.B.), 19.0°C W.B. (66.2°F W.B.) and outdoor air
temperature of 35°C D.B. (95°F D.B.), 24°C W.B. (75.2°F W.B.)
2. Heating capacities are based on indoor temperature of 20°C D.B. (68°F D.B.) and outdoor air temperature of 7°C D.B. (44.6°F
D.B.), 6°C W.B. (42.8°F W.B.)
Note:
• Specification are subjected to change without prior notice for further improvement.
Heat Exchanger
Fin material Aluminium (Pre Coat) Aluminium (Blue Coat)
Fin Type Slit Fin Corrugate Fin
Row × Stage × FPI 2 × 15 × 21 1 × 19 × 17
Size (W × H × L) mm (inch) 610 × 315 × 25.4 22 × 483 × 576
Air Filter Type
Material Polypropelene —
Style One-touch —
Item Unit
Power Source (Phase, Voltage, Cycle)
ø Single Single
V 220 230
Hz 50 50
Input power
Cooling W 830 860
Heating W 700 740
Starting Current A 18 18
Running Current Cooling A 3.9 3.9
Heating A 3.3 3.3
Maximum Current A 5.1 5.1
Power Factor
Cooling % 97 96
Heating % 96 97
Power factor means total figure of compressor, indoor fan motor and outdoor fan motor.
Power Cord
Number of core 3 (1.5mm)
Length m (ft) 2 (6)
Thermostat ——
Protection Device — 2 Stage Overload Protector
Item Unit Indoor unit Outdoor unit
To Next Page
Loading...
Need help?
General
