7
Note:
• Specification are subjected to change without prior notice for further improvement.
Heat Exchanger Description Evaporator Condenser
Tube material Copper Copper
Fin material Aluminium Aluminium (Blue Coat)
Fin Type Slit Fin Corrugated Fin
Row / Stage (Plate fin configuration, forced draft)
(A) 2 × 15 (B) 2 × 15 2 × 26
FPI 21 19 16
Size (W × H × L) mm 610 × 315 × 25.4 826 × 663.9 × 44
Refrigerant Control Device — Capillary Tube
Refrigerations Oil (c.c) — SUNISO 4GDID or ATMOS M60
(A) 410 (B) 270
Ref ri ge ra nt ( R- 22) g ( oz ) — ( A) 1, 06 0 ( 37 .4 )
(B) 640 (22.6)
Thermostat Electronic Control —
Protection Device — Overload Protector
Capillary Tube Length mm — (A) 430 (B) 370
Flow Rate I/min — (A) 19.5 (B) 12.8
Inner Diameter mm — (A) 1.7 (B) 1.4
Air Filter Material Polypropelena —
Style One - touch
Capacity Control Capillary Tube
Compressor Capacitor μF, VAC — 30 μF, 370VAC
Fan Motor Capacitor μF, VAC 1.5 μF, 440VAC 3.0 μF, 450VAC
One Unit (A) One Unit (B)
Unit CS-C14GKZW CS-C9GKZW CU-2C23CKH
To Next Page
Loading...
