To Next PageTo Next PageWhat to do if my Panasonic CS-C12PKV does not work?
If your Panasonic Air Conditioner isn't turning on, first, check if the circuit breaker has tripped. Also, verify whether any timers have been set, as these could be preventing the unit from starting.
How to improve the efficiency of COOL mode on my Panasonic CS-C12PKV Air Conditioner?
If the COOL mode on your Panasonic Air Conditioner isn't working efficiently, make sure you've set the temperature correctly. Also, ensure all doors and windows are closed to keep the cool air in and clean or replace the filters. Finally, check that there are no obstructions blocking the air inlet and outlet vents.
Why does my Panasonic CS-C12PKV Air Conditioner remote control not work?
If your Panasonic Air Conditioner remote control isn't working, ensure the batteries are inserted correctly. If the display is dim or the signal is weak, try replacing the batteries with new ones.
What to do if my Panasonic CS-C12PKV doesn't receive the signal from the remote control?
If your Panasonic Air Conditioner isn't responding to the remote control, first, ensure that the receiver on the unit is not obstructed. Note that certain fluorescent lights may interfere with the signal transmitter; please consult authorised dealer.
Why is my Panasonic Air Conditioner compressor not compressing sufficiently?
Insufficient compression in a Panasonic Air Conditioner's compressor can occur if the electric current during operation is approximately 20% lower than the normal value, causing the discharge tube of the compressor to become abnormally hot (normally 70°C to 90°C). It can also happen if the difference between high and low pressure becomes almost zero.
Why is there a difference in air temperatures at the intake and outlet of my Panasonic CS-C12PKV Air Conditioner?
There could be several reasons for this. It could be due to insufficient refrigerant, a clogged strainer or capillary cube, an excessive amount of refrigerant, a dusty condenser preventing heat radiation, or an inefficient compressor. The electric current may be higher than specified. In cooling mode, the difference should be less than 8°C. If measuring gas side pressure reveals a lower than specified cooling gas side mode, this could also be the cause.
How to fix a noisy Panasonic Air Conditioner?
If your Panasonic Air Conditioner is noisy during operation, check if the unit has been installed at an incline. Also, ensure that the front panel is closed properly.
General| Model | CS-C12PKV |
|---|---|
| Refrigerant | R32 |
| Indoor Unit Dimensions (W x H x D) | 799 x 290 x 197 mm |
| Outdoor Unit Dimensions (W x H x D) | 650 x 511 x 230 mm |
| Type | Wall Mounted |
| Cooling Capacity | 3.52 kW |
| Energy Efficiency Ratio (Cooling) | 3.52 |
| Power Consumption (Cooling) | 1.0 kW |
Covers safe installation, operation, power cord, and plug handling for the unit.
Safety guidelines for using the remote control and its batteries.
In-depth explanation of human activity and sunlight sensors.
Specifies recommended indoor and outdoor operating temperature ranges.
Common issues and checks to perform before calling for service.
Identifies critical conditions requiring professional service.
