Panasonic CS-C12MKF-2 User Manual

24
TIMER
SET
CANCEL
ON
OFF
1
2
3
SET CLOCK RESET
REMOTE CONTROL
10
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
11
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
12
Press to restore the remote control’s default setting.
13
Not used in normal operations.
TO SET THE TIMER
TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
OFF
1
2
S
ET
Select ON or
OFF timer
Set the time Confirm
• To cancel ON or OFF timer, press
O
N
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 15 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
10
11
12
13
F567995_YF1110-0.indb 24F567995_YF1110-0.indb 24 4/20/2011 3:47:32 PM4/20/2011 3:47:32 PM
Process CyanProcess CyanProcess MagentaProcess MagentaProcess YellowProcess YellowProcess BlackProcess BlackPANTONE 293 CPANTONE 293 CPANTONE 293 C 2PANTONE 293 C 2

Panasonic CS-C12MKF-2 Specifications

General

Brand	Panasonic
Model	CS-C12MKF-2
Category	Air Conditioner
Language	English