– 34 –
MAC9512086C2
CS-C73KE
Servicing Information
2. Remove the Fan Motor by :-
– Release the fan motor leadwire by pressing the
hook at the center of the connector. (Fig. 4)
– Then remove the particular piece that holding
the fan motor by pressing the tab. (Fig. 4)
– Remove the discharge grille and then the drain
hose. (Fig. 4)
– Finally remove the fan motor by removing the
screw. (Fig. 5)
– REMINDER - To reinstall the fan motor, adjust
the connector of the fan motor as Figure 5.
Fan motor connector
Particular
piece
Tab
Fan motor
Discharge
grille
Fig. 4
Fig. 5
Screw
Fan motor
To install back the
Fan motor,
Please adjust the
connector location.
Untitled-4 6/28/00, 4:22 PM34
To Next Page
Loading...
