BEE Regulation (For COOLING Models)
Step a): Press and Hold the (Auto OFF/ON) button
on indoor Unit.
Control button, while holding the
indoor unit button.
Step b): Within 5 second, press once the Remote
Step c): After hearing a beep sound from the Indoor
Unit, immediately release the (Auto OFF/ON)
button on Indoor Unit.
All this should be done within 5 seconds.
Turn on the unit.•
•
•
Testing Guidelines
Cooling Test Mode for Full Load (100%) and
Half Load (50%)
1) Mode : Select ‘COOL’
2) Temperature : a) 16 ºC for Full Load (100%)
3) Air Swing : S
4) Fan speed :
et vane position to 3rd step from top
: b) 17 ºC for Half Load (50%)
(For Full Load)
(For Half Load)
28
Open the Front Panel by lifting Intake Grille.
Follow the below Instructions.
Maximum
DRY
FAN
DRY
FAN
Indoor unit Temperature Display will show “ ” for Full Load and “ ” for Half Load Setting.•
(Indication for Half load)
(Indication for Full load)
(Auto OFF/ON Button)
* Applicable for “EU/VU/KU/NU/SU/TU/YU” series.
To Next Page
Loading...
