11
ENGLISH
WEEKLY TIMER
■ Operation Details
• Weekly timer is only applicable for
wired remote control, press
MODE
for
3 seconds to select daily timer or
weekly timer.
• Daily timer and weekly timer could
not be set at the same time.
Weekly Timer
• Promotes energy saving by
allowing you to set up to 6 timers in
any given day.
• Same timer program cannot be set
on the same day.
Check Timer
MODE
SELECT
SET
CANCEL
2. Select the day.1. Enter timer
mode.
3. The display will show the program
for each of the selected day.
CHECK ODOUR WASH VENTILATION TEST RUN FILTER RESET
TEMP/
A/C No.
UP
DOWN
MODE
SELECT
SET
CANCEL
OFF
/
ON
TIMER/CLOCK
AIR SWING
ECONOMY
AUTO
AUTO
AUTO 123
FAN SPEED
AIR SWING
MON TUE WED THU FRI SAT SUN
ON
UP
DOWN
FAN
SPEED
AUTO
MODE
MANUAL
CZ-RD513C
CHECK ODOUR WASH VENTI
MODE
SELECT
SET
CANCEL
OFF
/
ON
TIMER/CLOCK
ECONOMY
UP
DOWN
FA
SP
AU
CZ-RD513C
ON
OFF
TIMER
1
MON TUE WED THU FRI SAT SUN
23456
Will light up if Timer
operation is selected
6 different programs can
be set in a day (1 ~ 6)
Day to be selected
Time to be
selected
(interval 10
minutes)
ON-Timer
To automatically
switch “ON”
the unit
OFF-Timer. To automatically
switch “OFF” the unit
Indicate the
selected day
●
Repeat steps 5 to 8 to set Timer 2 to 6, or press
CANCEL
to
cancel the related timers.
3
Select days to run timer
Press
MODE
to change the display to weekly timer.
Press
to select your desired day. The selected day will be highlighted with .
Press
SET
to deselect or select mark.
Repeat this step include other day.
Press
SELECT
to enter day setting.
8
Select ON/OFF Timer
Set the Timer
Press to choose ON or OFF.
Press
SET
to confi rm the selection.
Press
to select your desired time.
If you want to set together with your desired temperature,
press
UP
DOWN
to select the temperature.
Press
SET
to comfi rm the setting.
Press
SELECT
to enter Timer 1.
Modify Or Add Timer
• Perform check timer operation to
select the day. Repeat steps 4 to 8
to modify existing timer program, or
add any new timer program.
Disable Weekly Timer
• To disable weekly timer setting,
press
MODE
, then press
CANCEL
.
Cancel Timer
• Perform the step below to cancel
the timer program for a particular
day.
MODE
SELECT
SET
CANCEL
2. Select the day.1. Enter timer
mode.
3. Press to enter
day setting.
4. Press to cancel
the timer set.
• To enable previous weekly timer
setting, press
MODE
, then press
SET
.
Enable Weekly Timer