To Next Page
X
xjordanSep 23, 2025
Why does my Panasonic Air Conditioner's indoor fan stop sometimes when heating?
- Ggary75Sep 23, 2025
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to prevent unintended cooling.
Why does my Panasonic Air Conditioner's indoor fan stop sometimes when heating?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to prevent unintended cooling.
Why does my Panasonic CS-E12QD3EAW's POWER indicator blink before it's turned on?
The blinking POWER indicator on your Panasonic Air Conditioner before it is switched on is a preliminary step in preparation for operation when the ON timer has been set.
Why does my Panasonic CS-E12QD3EAW Air Conditioner's indoor fan stop sometimes on automatic?
The indoor fan in your Panasonic Air Conditioner stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why does my Panasonic CS-E12QD3EAW have a peculiar odor?
The peculiar odor from your Panasonic Air Conditioner may be due to damp smells emitted by the wall, carpet, furniture, or clothing in the room.
How to improve the efficiency of HEAT/COOL mode in my Panasonic Air Conditioner?
If your Panasonic Air Conditioner is not cooling or heating efficiently, make sure you have set the temperature correctly, and that all doors and windows are closed. Also, clean or replace the filters and clear any obstructions at the air inlet and outlet vents.
Why does my Panasonic Air Conditioner POWER indicator blink before I switch it on?
The POWER indicator on your Panasonic Air Conditioner might blink before you switch it on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
What to do if my Panasonic CS-E12QD3EAW Air Conditioner's cooling/heating capacity is reduced during the lowest fan speed setting?
If your Panasonic Air Conditioner's cooling or heating capacity is reduced at the lowest fan speed, it's because the low fan speed prioritizes low noise operation. To increase the cooling or heating capacity, increase the fan speed.
Why does my Panasonic CS-E12QD3EAW Air Conditioner's POWER indicator blink during HEAT mode with no warm air supply?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and no warm air is supplied (with the flap closed), it means the unit is in defrost mode and AIR SWING is set to AUTO.
Why does my Panasonic Air Conditioner have airflow even after operation has stopped?
The airflow continues even after the operation has stopped on your Panasonic Air Conditioner to extract remaining heat from the indoor unit. This process takes a maximum of 30 seconds.
Why does my Panasonic Air Conditioner's indoor fan stop occasionally during heating operation?
The indoor fan in your Panasonic Air Conditioner stops occasionally during heating operation to avoid unintended cooling effect.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Energy Efficiency Class Cooling | A++ |
| Heating Capacity | 4.0 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.10 |
| Power Supply | 220 - 240 V |
| Outdoor Unit Dimensions (W x H x D) | 780 mm x 542 mm x 289 mm |
