Panasonic CS-E9BKP User Manual

7
SETTING THE TIMER
Ensure that the current time is correct before setting the
timer. The timer cannot be set if the time display is
flashing.
■ ON-TIMER Operation
To start the air conditioner operation automatically.
• Press 1 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4 .
■ OFF-TIMER Operation
To stop the air conditioner operation automatically.
• Press 5 to set the operation.
• Press 2 to increase or decrease the time.
• Then press 3.
• To cancel this operation, press 4 .
● Timer Mode Operation Details
• When the ON-Timer is set, operation will start
before the actual set time. This is to allow the room
temperature to reach the setting temperature by the
setting time. (Maximum of 35 minutes in advance).
• Once the timer is set, operation will start and stop
at the same time everyday.
• The current time is not displayed when the timers
are set.
• When both timers are used together, the TIMER
mode indicator on the indoor unit remains lit even
when the operation is stopped by the OFF-TIMER.
CONVENIENCE OPERATION
Powerful and Sleep modes are available for Automatic
Operation, Heating, Cooling and Soft Dry.
■ Sleep Mode Operation
To obtain a comfortable room temperature while sleeping:-
• Press 6.
• Sleep mode indicator on the indoor unit will light up.
• To cancel this operation, press once more.
● Sleep Mode Operation Details
• When the room temperature reaches the set
temperature, the airflow volume will change to low,
automatically
• When used together with the timer, the timer has a
priority.
• Air blows out gently during sleep.
• For COOL/DRY operation.
■ Powerful Mode Operation
To obtain the set temperature quickly.
• Used in winter to warm yourself quickly upon
returning home (Heating + Powerful).
• Used in summer to cool yourself after a hot bath
(Cooling + Powerful).
• Press 7.
* Powerful mode indicator (orange) on the indoor
unit will light up.
• To cancel this operation, press once more.
● Note
• The setting temperature and the fan speed changes
automatically in order to heat, cool or dehumidify the
room quickly.
• The Powerful and Sleep modes can be set during
Automatic Operation.
ECONOMY
CHECK
AUTO
AUTO HEAT DRY FANCOOL
FAN
AUTO
RESET CLOCK
MODE
SLEEP
FAN SPEED
AIR SWING
OFF
CANCEL
ON
SET
1
2
3
TIMER
OFF/ON
POWERFUL
3
6
4
1
5
2
7
0~1 hour
S
e
t
t
i
n
g
T
e
m
p
e
r
a
t
u
r
e
2 hours
Approximately 10 hours operation
4 hours 3 hours
Sleep Operation
button is pressed.
Sleep Shift
operation starts
3.5°C
increase
0.5°C increase
Maximum 1.0°C increase
Maximum 1.0°C increase
Temperature shift automatically
(max.1°C increased) is depend on
remote control set temperature
and outdoor air temperature.
Temperature
Operation Temperature Fan Speed
Automatic
HEAT
COOL
DRY
3.5°C higher
2°C lower (For
first 20 minutes)
1°C lower (For
first 20 minutes)
Slightly
Stronger
• For HEAT operation
4.0°C decrease
1.0°C
increase
0~1
hour
1 hour
5 hours 3 hours
Sleep Operation
button is
pressed.
Sleep Shift
operation starts
S
e
t
t
i
n
g
T
e
m
p
e
r
a
t
u
r
e
Approximately 10 hours operation
Temperature

Panasonic CS-E9BKP Specifications

General

Brand	Panasonic
Model	CS-E9BKP
Category	Air Conditioner
Language	English