Panasonic CS-E9EKK - Timer; Timer Setting

8
AUTO
HEAT
FAN
SPEED
AIR
SWING
COOL
DRY
TEMP
AIR SWING
FAN SPEED
QUIET
POWERFUL
TIMER
ON
1 2 3
OFF
SET
CANCEL
MODE
OFF/ON
AC
RC
INVERTER
SET
CLOCK
CHECK
RESET
AUTO
HEAT
FAN
SPEED
AIR
SWING
COOL
DRY
TEMP
AIR SWING
FAN SPEED
QUIET
POWERFUL
TIMER
ON
1 2 3
OFF
SET
CANCEL
MODE
OFF/ON
AC
RC
INVERTER
SET
CLOCK
CHECK
RESET
2
SET
ON
1
OFF
CANCEL
Troubleshooting
● Timer indicator always on. ► The timer setting repeats daily once set.
● Remote control does not work. ► The batteries are inserted incorrectly or need replacing.
● The unit does not work. ► The circuit breaker is tripped or the timer is set incorrectly.
● Power indicator blinks before the unit is switched on. ► This is a preliminary step in preparation for the operation when the ON
timer has been set.
●
The timer is valid only when the clock is set correctly.
●
You can set your preferred time for ON and OFF timers. The
unit will turn ON or OFF automatically.
●
To cancel ON or OFF timer, press
ON
or
OFF
, then press
CANCEL
.
■ Operation Details
TIMER
• The timer allows you to turn the air
conditioner on or off automatically.
• The unit may start in preliminary
operation before the actual set
time when ON timer has been set.
• The set timer repeats daily once
set.
• If there is a power failure, you can
restore the previous setting (once
power is resumed) by pressing the
SET
button.
• If the timer is cancelled, press
SET
to restore the previous setting.
■ Hints
• Press and hold the
CLOCK
for
approximately 5 seconds to set
either 12-hour (am/pm) or 24-hour
time indication.
• To dim the indicator display:
• To switch the temperature setting
to °C or °F, press and hold
for approximately 10 seconds.
Select ON or
OFF timer.
1
1
Cancel the
selected
timer.
Set the
desired time.
2
2
Confirm the
setting.
3
3
Press and hold
for 5 seconds.
To cancel, press
the again for
5 seconds.