To Next PageTo Next PageWhat to do if my Panasonic CS-E9LKEW Air Conditioner remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, make sure the batteries are inserted correctly or replace weak batteries.
What does it mean when the timer indicator is always on in my Panasonic CS-E9LKEW?
If the timer indicator on your Panasonic Air Conditioner is always on, it means the timer setting repeats daily once set.
What does it mean when the power indicator blinks during HEAT mode with no warm air supply in my Panasonic CS-E9LKEW?
If the power indicator blinks during HEAT mode and there's no warm air supply from your Panasonic Air Conditioner, the unit is likely in defrost mode and the AIR SWING is set to AUTO.
What to do if my Panasonic Air Conditioner unit stops and the timer indicator blinks?
To address this issue, use the remote control to retrieve the error code: press for 5 seconds, then press until you hear a beep sound and note the error code. For certain errors, you may restart the unit with limited operation, indicated by 4 beeps during start-up. If the problem persists, turn the unit off and provide the error code to an authorized dealer.
What to do if there is a refrigeration cycle abnormality in my Panasonic CS-E9LKEW?
If you suspect a refrigeration cycle abnormality in your Panasonic Air Conditioner, it's likely due to insufficient refrigerant or a closed valve. You should check the refrigeration system to resolve this issue.
Why does my room have a peculiar odour when using Panasonic Air Conditioner?
A peculiar odour in the room when using your Panasonic Air Conditioner may be due to a damp smell emitted by the wall, carpet, furniture, or clothing.
What to do if Patrol sensor or e-ion indicator on the indoor unit is blinking on my Panasonic CS-E9LKEW?
To resolve this, stop the Patrol or e-ion operation and then restart it. If the patrol sensor or e-ion indicator continues to blink, please consult an authorized dealer.
Why does my Panasonic CS-E9LKEW Air Conditioner make a water flowing sound during operation?
The water flowing sound you hear during the operation of your Panasonic Air Conditioner is due to refrigerant flow inside the unit.
Why does my Panasonic CS-E9LKEW make a cracking sound during operation?
The cracking sound during operation of your Panasonic Air Conditioner is due to changes in temperature causing the expansion and contraction of the unit.
Why does mist emerge from my Panasonic CS-E9LKEW Air Conditioner indoor unit?
Mist emerges from the indoor unit of your Panasonic Air Conditioner due to the condensation effect caused by the cooling process.
General| Type | Split System |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Energy Efficiency Class Cooling | A++ |
| Energy Efficiency Class Heating | A+ |
Explains multi-unit system space saving by connecting multiple indoor units.
Details indoor unit operation in multi-split systems, including mode priority.
Guidance on cleaning the indoor unit, including prohibited methods and detergents.
Identifies and describes key parts like front panel, receiver, and e-ion filters.
Explains the meaning of various indicator lights on the remote control.
Covers turning unit on/off, setting temperature, modes, and fan speed.
Details airflow direction and quiet environment functions.
Explains ECO PATROL, e-ion air purifying, and quick temperature features.
Instructions on setting timers and important operational notes.
Describes symptoms that do not indicate malfunction, such as mist or sounds.
Lists checks to perform before calling for servicing for common issues.
Details limitations and influences on the ECO PATROL sensor's detection.
Procedures for retrieving error codes and recommendations for non-use.
Lists critical issues requiring consultation with an authorized dealer.
Information on the proper collection and disposal of electrical equipment and batteries.
Step-by-step instructions for preparing and setting up the remote control.
