To Next PageTo Next PageWhy is my Panasonic CS-F34DB4E5 showing an F27 error?
The issue may stem from an indoor/outdoor unit disconnection or connection error. Check the indoor/outdoor unit connection cable and connection terminals, and verify the power supplies on both the indoor and outdoor units. Also, inspect the indoor/outdoor unit connection wire on both the indoor and outdoor sides.
What to do if my Panasonic CS-F34DB4E5 displays error F31?
This error indicates a potential problem with the refrigeration system. It could be due to insufficient refrigerant, a valve operation issue (closed), leakage refrigerant, a 4-way valve problem, or freezing (in cooling models). Check the refrigerant system and the 4 way valve or lead wire. Replenish refrigerant if needed.
What does the F32 error mean on my Panasonic Air Conditioner?
This error suggests an inverter protection issue, compressor problem, or rotation compressor problem. Check the power supply, IPM fault, PCB (MAIN) fault, open phase or lock in compressor, PFC fault (PCB-PFC fault). Also check for insufficient refrigerant.
How to fix F30 error on Panasonic Air Conditioner?
This error code indicates a problem with the system. Check if the total capacity for the number of indoor units is insufficient or over. Also, check the main power supply terminal board connections, or switch over any two of the power supply wires.
What causes the F20 error on a Panasonic CS-F34DB4E5?
The F20 error indicates a problem with the indoor temperature sensor or the remote control thermistor. Inspect the indoor temperature sensor lead wire, the indoor unit connector CN-TH2, or the remote control thermistor.
What does error F17 mean on my Panasonic CS-F34DB4E5?
The error code F17 on your Panasonic Air Conditioner indicates a problem with the D. C Fan Motor. Check the indoor unit D. C Fan motor or connection terminals.
What does F21 error mean on Panasonic Air Conditioner?
The F21 error indicates a problem with the pipe temperature sensor in the indoor unit. Inspect the pipe temperature sensor lead wire or the indoor unit connector CN-TH1.
How to troubleshoot F35 error on Panasonic CS-F34DB4E5 Air Conditioner?
The error code F35 indicates that there is a D. C Fan motor lock problem. The suggested solution is to check the D. C Fan motor lock.
What does F15 error mean in Panasonic CS-F34DB4E5?
The F15 error indicates a drain level float switch problem. Check the drain pump and drain pipe, as well as the indoor unit connectors CN-DRMTR & CN-TH2.
What to do if my Panasonic Air Conditioner shows F26 error?
The F26 error suggests a problem with the remote control transmission. Check the remote control unit cable and connection terminals.
General| Energy Efficiency Class Cooling | A++ |
|---|---|
| Energy Efficiency Class Heating | A+ |
| Refrigerant | R32 |
| Power Supply | 220-240 V, 50 Hz |
| Type | Split System |
| Energy Efficiency Rating | A++ |
| Coefficient of Performance (COP) | 4.00 |
Explains safety symbols like prohibition and compulsory actions for safe operation.
Guidelines for safe use of the wireless remote control, including battery handling and child safety.
Ensures safe power connection, cord usage, and proper grounding for the unit.
Precautions for safe installation, operation, and maintenance of the indoor unit.
Safety guidelines for the outdoor unit regarding installation and physical handling.
Specifies indoor and outdoor temperature ranges for different operating modes and models.
Provides guidance on the collection, disposal, and recycling of old equipment and batteries.
Identifies control panel components and guides initial remote control setup with batteries.
Instructions for turning the unit on/off, setting desired temperature, and selecting operation modes.
Explains how to adjust fan speed and control the direction of airflow for comfort.
Details on Economy mode for power saving and Odour Wash/Clear functions.
Guides on setting the daily timer, managing unit addresses, and general usage hints.
Details the wired remote control layout and guides through initial setup and time setting.
Instructions for operating the unit via wired remote: power, temperature, and mode selection.
Covers adjusting fan speed, airflow direction, and activating economy mode.
Explains odour removal features and how to set the daily timer for automated operation.
Explains the functionality, applicability, and limitations of the weekly timer feature.
Guides on checking, modifying, cancelling, disabling, and enabling weekly timer programs.
Safety warnings and instructions for washing unit components and cleaning filters.
Steps for removing, cleaning, installing, and resetting the air filter for optimal performance.
Lists common operational symptoms and their likely causes, distinguishing normal from malfunction.
Guides users on checks to perform before calling for servicing to ensure efficient operation.
Explains the meaning of the 'CHECK' indicator on the wired remote and troubleshooting steps.
Provides instructions for seasonal inspection and preparation for extended periods of non-use.
Lists critical conditions requiring immediate power off and contact with an authorized distributor.
Concise steps for operating the air conditioner using the wireless remote control.
Concise steps for operating the air conditioner using the wired remote control.
