Why the room has a peculiar odour when using Panasonic CS-ME9PD3EA?
If you notice a peculiar odour in the room when using your Panasonic Air Conditioner, it may be due to damp smells emitted by the wall, carpet, furniture, or clothing.
Why my Panasonic CS-ME9PD3EA Air Conditioner makes cracking sound?
A cracking sound during operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion or contraction of the unit.
Why POWER indicator blinks during HEAT mode on Panasonic CS-ME9PD3EA Air Conditioner?
If the POWER indicator on your Panasonic Air Conditioner blinks during HEAT mode and there's no warm air, with the flap closed, it means the unit is in defrost mode and AIR SWING is set to AUTO.
Why is my Panasonic CS-ME9PD3EA Air Conditioner delayed a few minutes after restarting?
The few minutes delay after restarting your Panasonic Air Conditioner is a protection mechanism for the unit’s compressor.
Why does airflow continue after operation has stopped on my Panasonic CS-ME9PD3EA Air Conditioner?
The airflow continues even after your Panasonic Air Conditioner has stopped operating because the unit is extracting remaining heat from the indoor unit, which can take up to 30 seconds.
How to fix a Panasonic CS-ME9PD3EA Air Conditioner remote control that is not working?
If your Panasonic Air Conditioner remote control isn't working, ensure that you have inserted the batteries correctly or replace the weak batteries.
Why does mist emerge from the indoor unit of my Panasonic Air Conditioner?
The mist emerging from the indoor unit is a condensation effect resulting from the cooling process.
Why does the POWER indicator blink before I turn on my Panasonic CS-ME9PD3EA?
The POWER indicator blinking before your Panasonic Air Conditioner is switched on is a preliminary step in preparation for operation when the ON timer has been set.
What does it mean when the POWER indicator blinks before my Panasonic CS-ME9PD3EA Air Conditioner is switched on?
The blinking POWER indicator before the unit is switched on is a preliminary step in preparation for operation when the ON timer has been set on your Panasonic Air Conditioner.
What to do if Panasonic CS-ME9PD3EA remote control does not work?
If the remote control for your Panasonic Air Conditioner isn't working, first, ensure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Indoor Unit Noise Level | 20 dB(A) |
To Next Page
