Why is my Panasonic CS-ME9PD3EA not receiving the signal from the remote control?
If your Panasonic Air Conditioner isn't receiving the signal from the remote control, ensure that there are no obstructions blocking the transmitter. Also, be aware that certain fluorescent lights may interfere with the signal.
Why is my Panasonic Air Conditioner outdoor unit emitting water or steam?
The water or steam emitted from the outdoor unit of your Panasonic Air Conditioner is due to condensation or evaporation occurring on the pipes.
Why does my Panasonic CS-ME9PD3EA Air Conditioner POWER indicator blink before I switch it on?
The POWER indicator on your Panasonic Air Conditioner might blink before you switch it on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
What to do if the power cord of my Panasonic Air Conditioner becomes unnaturally warm?
If the power cord of your Panasonic Air Conditioner becomes unnaturally warm, turn off the power supply, unplug the unit, and consult an authorized dealer.
Why does the outdoor unit of my Panasonic CS-ME9PD3EA emit water or steam?
The outdoor unit of your Panasonic Air Conditioner emits water or steam due to condensation or evaporation occurring on the pipes.
Why does the POWER indicator blink before my Panasonic Air Conditioner turns on?
The POWER indicator blinking before the unit is switched on is a preliminary step in preparation for the operation when the ON timer has been set on your Panasonic Air Conditioner.
Why my Panasonic CS-ME9PD3EA Air Conditioner makes cracking sound?
A cracking sound during operation of your Panasonic Air Conditioner is due to temperature changes causing the expansion or contraction of the unit.
Why is my Panasonic CS-ME9PD3EA Air Conditioner remote control not working?
If your Panasonic Air Conditioner remote control isn't working, make sure the batteries are inserted correctly. If the display is dim or the transmission signal is weak, try replacing the batteries.
What to do if my Panasonic CS-ME9PD3EA unit does not receive the signal from the remote control?
If your Panasonic Air Conditioner unit isn't receiving the signal from the remote control, ensure that the receiver is not obstructed. Certain fluorescent lights may interfere with the signal transmitter; please consult an authorised dealer.
Why is my Panasonic Air Conditioner HEAT/COOL mode not working efficiently?
If the HEAT/COOL mode on your Panasonic Air Conditioner isn't working efficiently, make sure the temperature is set correctly. Ensure all doors and windows are closed. Clean or replace the filters. Additionally, clear any obstructions at the air inlet and air outlet vents.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Indoor Unit Noise Level | 20 dB(A) |
To Next Page
