To Next PageTo Next PageWhy does the POWER indicator blink on my Panasonic CS-ME9PD3EA Air Conditioner before it turns on?
The POWER indicator on your Panasonic Air Conditioner might blink before the unit is switched on as a preliminary step in preparation for operation when the ON timer has been set. When the ON Timer is set, the unit may start earlier (up to 35 minutes) before the actual set time in order to achieve the desired temperature on time.
Why is my Panasonic Air Conditioner making a cracking sound during operation?
The cracking sound during operation is caused by changes in temperature that lead to the expansion and contraction of the unit's components.
What causes the water flowing sound in Panasonic CS-ME9PD3EA Air Conditioner during operation?
The water flowing sound during operation is due to the refrigerant flow inside the unit.
Why does my room smell peculiar when using Panasonic Air Conditioner?
The room may have a peculiar odor because of a damp smell emitted by the wall, carpet, furniture, or clothing.
Why does the indoor fan stop sometimes on my Panasonic Air Conditioner?
The indoor fan stops occasionally during automatic fan speed setting to help remove surrounding odors.
Why does airflow continue after my Panasonic Air Conditioner has stopped?
Airflow continues even after operation has stopped because of the extraction of remaining heat from the indoor unit, which can take up to 30 seconds.
What causes a cracking sound during operation of my Panasonic CS-ME9PD3EA Air Conditioner?
The cracking sound you hear during the operation of your Panasonic Air Conditioner is due to the expansion and contraction of the unit caused by changes in temperature.
Why POWER indicator blinks in HEAT mode of Panasonic CS-ME9PD3EA?
The POWER indicator blinks during HEAT mode with no warm air supply (and flap is closed) because the unit is in defrost mode (and AIR SWING is set to AUTO).
Why does the indoor fan stop during heating operation of Panasonic CS-ME9PD3EA?
The indoor fan stops occasionally during heating operation to avoid an unintended cooling effect.
Why does my Panasonic CS-ME9PD3EA Air Conditioner stop in COOL/DRY mode and POWER indicator blinks?
During COOL/DRY mode, the indoor unit stops and the POWER indicator blinks because the system has locked to operate in HEAT mode only.
General| Cooling Capacity | 2.5 kW |
|---|---|
| Heating Capacity | 3.2 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Indoor Unit Noise Level | 20 dB(A) |
