Why is the gas side pressure low in my Panasonic CS-NZ35YKE Air Conditioner?
Low gas side pressure in your Panasonic Air Conditioner can be due to several reasons: insufficient refrigerant, a clogged strainer or capillary tube, or an inefficient compressor.
What causes low gas side pressure in heating mode for Panasonic Air Conditioner?
Low gas side pressure in heating mode for your Panasonic Air Conditioner might be caused by insufficient refrigerant or a clogged strainer, capillary tube, or expansion valve.
Why is gas side pressure high in cooling mode on my Panasonic CS-NZ35YKE?
High gas side pressure in cooling mode on your Panasonic Air Conditioner could indicate an inefficient compressor. Measuring gas side pressure may help to identify this issue.
Steps to pull out the back cover, insert AAA or R03 batteries, and close the cover.
Instructions for setting the 12-hour or 24-hour clock using the CLOCK and SET buttons.
Press the POWER button to start or stop the air conditioner operation.
Use the MODE button to select HEAT, COOL, AUTO, FAN, or DRY mode.
Use TEMP UP and TEMP DOWN buttons to select the desired temperature.
Guide to setting ON and OFF timers for the unit at two different preset times.
Essential checks to perform before calling for servicing to resolve common issues.
Procedure to retrieve error codes using the remote control and a list of diagnostic displays.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Energy Efficiency Class (Cooling) | A++ |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Operating Temperature (Heating) | -15°C to 24°C |
To Next Page
