4
REMOTE CONTROL
AUTO
COOL
DRY
FAN
FAN
SPEED
AIR
SWING
AUTO
COOL
DRY
FAN
FAN
SPEED
AIR
SWING
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• For cool and dry modes, the range of temperature for
selection is 16˚C~30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
• To change the standard setting temperature, press for
“ ” or for “ ”.
Room
temperature
Operation
mode
Standard setting
temperature
(+2°C)
(–2°C)
23°C &
above
Cool 25°C 27°C 23°C
Below 23°C Dry 22°C 24°C 20°C
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
FAN mode - To maintain a good ventilation of the room
• The compressor will not operate during air circulation
operation.
Maximum distances: 8m
INDICATOR
(Green)
(Orange)
3
4
5
Remote Control display
1
2
4
TO SELECT FAN SPEED (3 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST VERTICAL AIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY/FAN mode, if AUTO is set, the louver
swing up/down automatically.
F567253_EN_CS4.indd 4 2009-12-4 15:09:22
To Next Page
Loading...
