Panasonic CS-PS9NKP

12
REMOTE CONTROL
Press the remote control’s button
1
TO TURN ON OR OFF THE UNIT
POWER
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
2
TO SET TEMPERATURE
• Selection range: 16°C ~ 30°C.
• Operating the unit within the recommended temperature
could induce energy saving.
COOL mode : 26°C ~ 28°C.
DRY mode : 1°C ~ 2°C lower than room temperature.
3
TO SELECT OPERATION MODE
AUTO mode - For your convenience
• During operation mode selection the power indicator
blinks.
• Unit selects operation mode during startup according to
temperature setting and room temperature.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
Maximum distance: 8m
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN
S
PEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST VERTICAL AIRFLOW DIRECTION
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
up/down automatically.
6
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
7
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F.
8
Press to restore the remote control’s default setting.
9
Not used in normal operations.
FAN SPE
ED
AIR SWI
NG
MOD
E
TEMP
OFF/
ON
TIMER
SET
CANCEL
ON
OFF
1
2
3
OFF
TIM
ER
ON
TIMER
AUTO
COOL
DRY
FAN
SPE
ED
AIR
SWING
CLOCK
SET CHECK
RESET
AC
RC
3
4
5
6
7
Remote Control display
1
8
2
9
INDICATOR
POWER
(Green)
TIMER
(Orange)